Acer Altos G310 - Manual (Page 111)

101
BIOS POST
Event Logging BIOS checks the bad processors and mem-
ory modules during the POST process.
When this parameter is enabled, it will
make a log of this operation. Enabled
Disabled
ECC Event
Logging ECC (Error Correcting Code) tests the accu-
racy of data as it passes in and out of mem-
ory. When this parameter is enabled,
single-bit and multi-bit memory errors will
be recorded in the event log. Enabled
Disabled
PCI Device
Event Logging PCI (Peripheral Component Interconnect) is
a 32-bit bus that supports a 64-bit exten-
sion for new processors, such as Pentium
processors. It can run at clock speeds of 33
or 66 MHz. When this parameter is
enabled, any PCI device error will be
recorded in the event log. Enabled
Disabled
AC Power
Lost/Recovery When this parameter is enabled, any
instance of AC power lost will be moni-
tored and logged in the event log. Disabled
Enabled
Intrusion
Event Logging Allow logging of chassis intrusion events. Enabled
Disabled
Software NMI Enabled is the default setting. Enabled
Disabled
Parameter Description Option
BB!H421!.!FO/cppl!!Qbhf!212!!Gsjebz-!Nbz!8-!3115!!2;42!QN