Acer Altos G310 - Manual (Page 75)

65
Select the strip value for the RAID 0 array by scrolling through the
available values by using the “up arrow” or “down arrow” keys. Press
the <Enter> key to select and advance to the next field.
The available values range from 4KB to 128 KB in power of 2
increments. The strip value should be chosen based on the planned
drive usage. Here are some suggested selections:
• 16 KB - Best for sequential transfers
• 64 KB - Good general purpose strip size
• 128 KB - Best performance for most desktops and workstations
The default strip size is 128 KB.
From the Strip size, press the <Tab> or <ENTER> key to advance to the
Create Volume prompt. The window will appear as follows:
BB!H421!.!FO/cppl!!Qbhf!76!!Gsjebz-!Nbz!8-!3115!!2;42!QN