Acer Altos G310 - Manual (Page 52)

4 Configuring the system 42
To remove the front panel
The front bezel is attached to the chassis by screwless hinges. To
remove the front panel, you must remove the side panel first.
To remove the front bezel:
1 With your finger, pull the Front Panel Release lever located at the
bottom front inside the chassis (1).
2 Gently pull the bottom of the Front bezel away from the chassis
(2), lift it to approximately 45 degrees, then detach the top and
move it away from the chassis.
BB!H421!.!FO/cppl!!Qbhf!53!!Gsjebz-!Nbz!8-!3115!!2;42!QN