Device connection, Connect multiple devices, Prompt device plug-in – Lenovo S880 Smartphone User Manual
Page 5: Connect single device, Switch device, Evice, Onnection
Device Connection
Connect Multiple Devices
When plugging in multiple devices, the steps of connecting are as follows:
1. The interface shows the names of devices and list of device No.;
2. User selects one of devices in the list;
3. Click the button [Connect] to start connection;
4. The interface shows "connection waiting". After gaining overview data, the
[homepage] interface will show.
Prompt Device Plug-in
When no device is plugged in, the interface shows as follows:
1. Display a default picture in cell phone;
2. Display prompt words saying "Plug in device".
Connect Single Device
When there is only a set of device inserted, automatic connection will be
implemented. The steps are as follows:
1. Program detects the inserted device and the interface shows "connection
waiting";
2. After gaining overview data of the device such as device name, cell phone
and memory capacity of memory card, the [homepage] interface will show.
Switch Device
The steps for disconnecting and switching device:
1. Click the button [Switch Device] at the right of [Homepage];
2. If there is only one cell phone, it will reconnect automatically; if there are
more than two cell phones, it will list all devices No. for users to select new
device for connection.