Lenovo Li2341t Wide Flat Panel Monitor - Manual (Page 15)

Chapter 2. 2-4
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
To use the controls:
Press 1. to open the main OSD menu.
Use 2. or to move among the icons. Select an icon and press to access that function. If
there is a sub-menu, you can move between options using or , then press to select that
function. Use or to make adjustments. Press to save.
Press
3. to move backwards through the sub-menus and exit from the OSD.
Press and hold 4. for 10 seconds to lock the OSD. This will prevent accidental adjustments to
the OSD. Press and hold for 10 seconds to unlock the OSD and allow adjustments to the
OSD.
Enables DDC/CI by default. Use OSD Exit Key, Press and hold
5. for 10 seconds to disable
/ enable DDC/CI function. The words "DDC/CI disable" shows on the screen.
Brightness/Contrast
Brightness Contrast
Exit Left Right OK