Installing the monitor driver in windows vista – Lenovo Li2341t Wide Flat Panel Monitor User Manual
Page 27
X:\Monitor Drivers
(where X is the drive letter designator for the CD-ROM drive).
Installing the monitor driver in Windows Vista
To use the Plug and Play feature in Microsoft Windows Vista, do the following:
Note: You must download file from the Reference and Driver CD to use the Plug and Play feature
in Windows Vista.
Turn off the computer and all attached devices.
1.
Ensure that the monitor is connected correctly.
2.
Turn on the monitor and then the system unit. Allow your computer to start the Windows Vista
3.
operating system.
Click
4.
Start, Control Panel and then click the Hardware and Sound icon.
Click the
5.
Personalization icon.
Click the
6.
Display Settings icon.
Click the
7.
Advanced Settings button.
Click the
8.
Monitor tab.
Click the
9.
Properties button.
Click the
10.
Driver tab.
Click
11.
Update Driver, then click Browse the computer to find the driver program.
Select
12.
Pick from the list of device driver program on the computer.
Click the
13.
Have Disk button. Click the Browse button and navigate to the following directory:
Select the "
14.
LI2341t Wide�inf" file and click the Open button. Click the OK button.
Select
15.
LEN LI2341t Wide and click Next. The files will be copied from the CD to your hard
disk drive.
Close all open windows and remove the CD.
16.
Restart the system. The system will automatically select the maximum refresh rate and
17.
corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh
rate of 60 Hz.
Chapter 3. 3-7