Lenovo Li2341t Wide Flat Panel Monitor - Manual (Page 9)

Chapter 1. 1-5
Connect the digital cable to the DVI connector of the monitor and the other end on the back of 4.
the computer.
Connect one end of the HDMI cable to the monitor HDMI connector and the other end to the 5.
computer if it has one HDMI output connector.
Use the USB 2.0 cable (included with the monitor) to connect the monitor to one of the USB 2.0 6.
ports of the computer. Windows will automatically search for the Touch Module, and proceed
with the installation of the driver.
Note: Connect Monitor’s USB cable to an available USB 2.0 port on computer. Windows
automatically detects the device.