Lenovo IdeaCentre K315 User Manual

Page 32

Advertising
background image

27

Hardware Replacement Guide

6. Lift the defective heat sink and fan assembly away from the system board.
7. Use the thermal grease syringe to place five drops of grease on the top of the

microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the
grease syringe).

8. Install the new heat sink and fan assembly on the heat sink retention bracket.
9. Reconnect the disconnected cables to the system board.
10. Refer to the “Completing the installation”.

Advertising