Removing and reinstalling the system stand – Lenovo S710 All-in-One User Manual
Page 74
Figure 5. Removing the system stand hinge cover
6. To reinstall the system stand hinge cover, place the system stand hinge cover on the computer so that
the plastic tab on the hinge cover aligns with the corresponding hole in the computer.
7. Reinstall the screw to secure the system stand hinge cover to the computer.
Figure 6. Reinstalling the screw to secure the system stand hinge cover to the computer
Removing and reinstalling the system stand
Attention
Do not open your computer or attempt any repair before reading and understanding the “Important safety
information” in the Safety, Warranty, and Setup Guide that came with your computer. To obtain a copy of the
Safety, Warranty, and Setup Guide, go to:
This section provides instructions on how to remove and reinstall the system stand.
68
Lenovo S710 All-In-OneHardware Maintenance Manual