Using audio features – Lenovo ThinkPad Edge E145 User Manual

Page 52

Advertising
background image

5. Set the resolution for the secondary display.

6. Click Advanced settings and set up the color quality on the Monitor tab.

7. Click OK to apply the changes.

Considerations for using the Extend desktop function

• If you want to show DOS full-screen while in the Extend desktop mode, only the primary display shows

DOS; the other display is blacked out.

• You can designate the other display as the primary display by doing the following:

1. Right-click on the desktop, then select Screen resolution.

2. Select Extend these displays in Multiple Displays.

3. Change the setting to designate the primary display.

• When a program using DirectDraw or Direct3D is played in full-screen mode, it is shown only on the

primary display.

• You cannot use the display switching function when you are in the Extend desktop mode.

Using audio features

Your computer is equipped with the following:

• Microphone

• Speakers

• Combo audio connector, 3.5 mm (0.14 inch) in diameter

Your computer also has an audio chip that enables you to enjoy various multimedia audio features:

• Compliant with Intel High Definition Audio

• Playback of Musical Instrument Digital Interface (MIDI) and Moving Picture Experts Group Audio Layer-3

(MP3) files

• Recording and playback of pulse-code modulation (PCM) and Waveform Audio File Format (WAV) files

• Recording from various sound sources, such as a headset attached

Note: The combo audio connector does not support a conventional microphone.

The following table shows which functions of the audio devices attached to the connectors on your
computer are supported.

Table 3. Audio feature list

Connector

Headset with a 3.5 mm
4-pole plug

Conventional headphone

Conventional microphone

Combo audio connector

Headphone and
microphone functions
supported

Headphone function
supported

Not supported

Configuring for sound recording

To configure the microphone for optimal sound recording, use the Realtek HD Audio Manager program. To
start the program, go to Control Panel and click Hardware and Sound Realtek HD Audio Manager.

36

User Guide

Advertising