Lenovo ThinkPad Edge E145 User Manual
Page 85
Advertising
![background image](/manuals/471359/85/background.png)
2. Close the computer display, and turn the computer over.
3. Remove the battery. See “Replacing the battery” on page 61.
4. Loosen the screws
1
, and then remove the cover
2
.
5. Open the latches on both sides of the slot at the same time
1
, and then remove the memory module
2
.
Save the removed memory module for future use.
6. Place the notched end of the new memory module toward the contact edge side of the memory slot
and insert the memory module
1
into the slot at an angle of about 20 degrees. Pivot the memory
module downward until it snaps into place
2
. Ensure that the memory module is firmly installed in
the slot and cannot be moved easily.
69
Advertising