Lenovo ThinkCentre M57p - Manual (Page 28)

3. Pivot the drive bay assembly upward to gain access to the cable connections
and disconnect the drive bay cables. See Figure 13.
4. Remove the metal shield from the diskette drive bay by using a flat-blade
screwdriver to gently pry it loose.
5. Remove the plastic panel in the bezel by squeezing the plastic tabs that secure
the panel on the inside of the bezel.
6. Slide the diskette drive lock to the unlock position. See “Locating components”
on page 8.
7. Connect the flat cable to the new drive.
Figure 13. Accessing the cable connections
20 ThinkCentre Hardware Installation and Replacement Guide