Installing internal options, Opening the cover, Installing – Lenovo ThinkCentre M57p User Manual

Page 20: Internal, Options, Opening, Cover, Pivoting

Advertising
background image

Installing

internal

options

Important

Read

“Handling

static-sensitive

devices”

on

page

4

before

opening

the

computer

cover.

Opening

the

cover

Important

Turn

off

the

computer

and

wait

3

to

5

minutes

to

let

the

computer

cool

before

opening

the

computer

cover.

To

open

the

computer

cover:

1.

Remove

any

media

(diskettes,

CDs,

or

tapes)

from

the

drives,

shut

down

your

operating

system,

and

turn

off

all

attached

devices

and

the

computer.

2.

Unplug

all

power

cords

from

electrical

outlets.

3.

Disconnect

the

cables

attached

to

the

computer.

This

includes

power

cords,

input/output

(I/O)

cables,

and

any

other

cables

that

are

connected

to

the

computer.

See

“Locating

controls

and

connectors

on

the

front

of

your

computer”

on

page

5

and

“Locating

connectors

on

the

rear

of

your

computer”

on

page

6.

4.

Remove

any

locking

devices,

such

as

a

cable

lock

that

secures

the

computer

cover.

5.

Press

the

buttons

on

the

sides

of

the

computer

and

pivot

the

cover

upward

to

open

the

computer.

Figure

5.

Pivoting

the

cover

12

ThinkCentre

Hardware

Installation

and

Replacement

Guide

Advertising
This manual is related to the following products: