Replacing the hard disk drive – Lenovo S20-00 All-in-One User Manual

Page 50

Advertising
background image

45

User Guide

7. Reattach the computer cover.

Replacing the hard disk drive

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool

down before removing the cover.

Note: It may be helpful to place the computer face-down on a soft flat

surface for this procedure. Lenovo recommends that you use a blanket,
towel, or other soft cloth to protect the touch screen from scratches or
other damage.

1. Remove any media (disks, CDs, or memory cards) from the drives, shut down

the operating system, and turn off the computer and all attached devices.

2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,

input/output (I/O) cables, and any other cables that are connected to the
computer. Refer to “Left and right views” and “Rear view” for help with locating
the various connectors.

4. Remove the computer cover. Refer to “Removing the computer cover”.
5. Remove the four screws that secure the hard disk drive assembly to the

chassis, then lift up the assembly and disconnect the power and data cable
from the connector on the hard disk drive.

Advertising