AT&T 1477/1177 - Manual (Page 20)

18
Directory Dialing
Speed dialing
Base: Numbers called most frequently can be stored in
memory locations 0-9 and dialed with only three button
presses. The base can store 10 Speed Dial numbers up
to 24 digits long.
Handset: Numbers called most frequently can be
stored in memory locations 1-9 and dialed with only
two button presses. The handset can store 9 Speed
Dial numbers (up to 24 digits) with names (up to 15
characters). Each entry is stored in a one-digit memory
location(1-9).
To enter a Speed Dial number
Base:
1 Press @
PROG
to begin programming.
2 Press @
MEM
.
3 Press dial pad to choose memory location (0-9).
4 Enter a telephone number (up to 24 digits).
5 Press @
PROG
. You'll hear a confirmation tone.
Handset:
1 Press
@
PROG/CHAN
to begin programming.
2 Press ^ to display SPEED DIAL .
3 Press
SELECT
.
4 Press dial pad to choose memory location (1-9).
5 Enter a name (up to 15 characters), then press
SELECT
.
6 Enter a telephone number (up to 24 digits), then
press
SELECT
.
7 Choose distinctive ringing (yes or no).
8 Press
@
PROG/CHAN
or
SELECT
to store the num-
ber. You will hear a confirmation tone.
Speakerphone Base
91-5677-20-00.ATT1477.RO.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 18