AT&T 1477/1177 - Manual (Page 35)

33
Answering System Operation
Message playback
Press the @
PLAY/STOP
button to hear incoming mes-
sages you’ve received. The system announces the num-
ber of messages, then begins playback.
If you have new messages, you will hear only the new
messages (oldest first). If there are no new messages, the
system will play back all messages (oldest first).
Announcements
• When playback begins, you will hear the number of
messages.
• Before each message, you will hear the day and time
it was received.
• After the last message, you will hear “End of mes-
sages.” If the system has less than 5 minutes of
recording time left, you will hear time remaining.
Options during playback
• Press
^V to adjust speaker volume.
• Press } to skip to next message (or hold down to
speed up message playback).
• Press { to repeat message currently playing. Press
twice to hear previous message. (Hold down to slow
message playback).
• Press @
DELETE
to delete message being played back.
• Press @
PLAY/STOP
to stop playback.
To delete all messages
To delete all messages, press and hold the
@
DELETE
button while the phone is idle (not during a call, or
during message playback). This will delete all old
messages. New messages (ones you have not yet played
back) will not be deleted.
1 @
PLAY/STOP
“You have [xx] new
messages and [xx] old
messages”
Number of messages (or, during
playback, message number cur-
rently playing)
Message playback begins. See
options at right.
2 @
PLAY/STOP
Message playback ends.
NOTE:
If “F” is flashing
in the message window, memory
is full. You will have to delete
some messages before new ones
can be received.
NOTE:
New (unheard)
messages cannot be deleted.
3
91-5677-20-00.ATT1477.RO.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 33