Konica Minolta bizhub 361 - Manual (Page 29)

501/421/361 2-12
Administrator Operations 2
4
Select [ON] to enable the Enhanced Security Mode and touch [OK].
– The following screen appears if the previously required settings are yet to be made by the
Administrator of the machine. Make the necessary settings according to the corresponding set
procedure.
– The following screen appears if the previously required settings are yet to be made by the Service
Engineer. Consult the Service Representative.
? What is the factory setting for the Enhanced Security Mode?
% The Enhanced Security Mode is factory-set to [OFF]. Be sure to turn [ON] the Enhanced Security
Mode so as to enable the security function of the machine.
5
Touch [OK].