Konica Minolta bizhub 361 - Manual (Page 183)

501/421/361 4-5
Application Software 4
4.1.2 Setting the user authentication method
2
Reminder
To change the user authentication method from "Device authentication" to "Network server authenti-
cation," it is necessary first to register the domain name of Active Directory on the machine side.
If "Network server authentication" is selected, "Active Directory" must invariably be selected.
<From the PC>
0 For the procedure to access the machine, see steps 1 through 5 of "Gaining access from PageScope
Data Administrator" on page 4-2 .
1
Access the machine through [Authentication Settings/Address Settings] mode of PageScope Data
Administrator.
2
Click the [Authentication settings].
3
Click the [User authentication].