Konica Minolta bizhub 361 - Manual (Page 27)

501/421/361 2-10
Administrator Operations 2
2
Reminder
When Password Rules is set to [ON], the characters and the number of digits used for each password
are restricted. For details of the Password Rules, see
"Password Rules" on page 1-9 .
2.2.1 Items cleared by HDD Format
Following are the items that are cleared by HDD Format.
Whenever HDD Format is executed, be sure to set the Enhanced Security Mode to [ON] again.
SNMP v3 Security Level and
auth/priv-password auth/priv-password The security level can be selected from among [auth-pass-
word] and [auth/priv-password].
An 8-digit-or-more auth-password and priv-password can
both be set.
Print Data Capture Allow Restrict (not to be changed)
Network Setting Clear Enabled Restrict
Administrator Password
Change Via Network Enabled Restrict (not to be changed)
Release Time settings 5 min. The setting value should be 5 min. or more (no value less
than 5 can be set)
Change by the user of desti-
nation data previously regis-
tered (Address Book and
Program) Allow Restrict (not to be changed)
System auto reset 1 min. 1 to 9 min
Changing in to [ NO use] is not allowed
Function Name Factory Setting When Enhanced Security Mode is set to [ON]
Types of Data Cleared Description
Enhanced Security Mode Set to [OFF]
User Authentication Set to [OFF]
Account Track Authentication Set to [OFF]
Public User Access Set to [Restrict]
User List Set to [OFF]
Print Without Authentication Set to [Restrict]
User registration data Deletes all user-related data that has been registered
Account Track registration
data Deletes all account track-related data that has been registered
Box registration data/file Deletes all User Box-related information and files saved in User Box
Deletes all data saved in the ID & Print User Box
Secure Print ID/Password/file Deletes all Secure Print Document-related information and files saved
Destination recipient data
files Deletes all destination recipient data including e-mail addresses and telephone num-
bers