4 canceling the operation prohibited state, 1 performing release setting, Setting can be made only from the control panel – Konica Minolta bizhub 361 User Manual

Page 34: Canceling the operation prohibited state -17

Advertising
background image

501/421/361

2-17

Administrator Operations

2

2.4

Canceling the Operation Prohibited State

When access to the Administrator of the machine by the Administrator Settings via the control panel is
authenticated, the machine enables the operation of Release Setting performed for canceling the state of
Prohibited Functions When Authentication Error (access lock state) as a result of unauthorized access.

Release Setting clears the unauthorized access check count for all User Authentication, Account Track,
SNMP authentication, WebDAV authentication, all Secure Print authentication, and all User Box
authentication, resetting it to zero.

Perform the following procedure to cancel the password entry prohibited state.

-

Administrator Settings: The operation prohibited state is canceled by the Service Engineer, or after the
lapse of a predetermined period of time after the main power switch is turned off and on

-

User/Account authentication: Release

-

Secure Print authentication: Release

-

User Box authentication: Release

-

SNMP authentication: Release

-

WebDAV authentication: Release

2.4.1

Performing Release Setting

2

Note

When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Here is the sequence, through which the main power switch and sub power switch are turned on and
off:
Turn off the sub power switch

→ Turn off the main power switch → Turn on the main power switch → Turn

on the sub power switch

Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.

<Setting can be made only from the control panel>

0

For the procedure to call the Security Details menu to the display, see steps 1 and 2 of

"Setting

Prohibited Functions When Authentication Error" on page 2-14

.

1

Call the Security Details to the screen from the control panel.

2

Touch [Prohibited Functions When Authentication Error].

Advertising