Konica Minolta BIZHUB C360 - Manual (Page 115)

bizhub C360/C280/C220 9-25
9.4 Parameter details 9
Reference
- The [2 Color] option of [Select Color] is available only for the PCL driver. [2 Color] allows you to specify
a combination of two colors.
- The [Full Color] option of [Select Color] is available for the PS/XPS driver.
- The [Auto Color] option of [Select Color] is available for the PCL/PS driver.
- The [Print with Black] function that becomes available when you select [Gray Scale] in [Select Color] is
available for the PCL/XPS drivers.
- The [Pattern] function is available for the PCL/XPS drivers.
- The [Image Compression] function is available only for the PCL driver.
- The [Auto Trapping] and [Black Over Print] functions are available only for the PS drivers.
- For the PS drivers, profile management with [Quality Adjustment] is also available. For details, refer to
page 12-36 and page 12-38.
- The [Font Settings] function is available for the PCL/PS drivers.
[Color Settings] [Document], [Photo],
[DTP], [Web], [CAD] Select any of the options to print with a quality suitable
for the selected original.
[Document]: Select this option to print with a quality
suitable for documents with many characters.
[Photo]: Select this option to print with a quality suitable
for photos.
[DTP]: Select this option to print with a quality suitable
for documents produced by DTP.
[Web]: Select this option to print with a quality suitable
for Web page printing.
[CAD]: Select this option to print with a quality suitable
for CAD data printing.
[Pattern] [Fine], [Coarse] Specify fineness of the graphic patterns.
[Image Compres-
sion] [Best Quality], [Maximum
Compression] Specify the compression ratio for a graphic image.
[Auto Trapping] ON/OFF Select this option to superimpose neighboring colors to
print so as to prevent white space being generated
around a picture.
[Black Over Print] ON/OFF
[Text], [Text/Figure] Select this check box to superimpose black color on a
neighboring color to print so as to prevent white space
being generated around black characters or figures.
You can specify to cause the overlapping on the char-
acters alone or on characters and figures.
[Glossy Mode] ON/OFF Select this check box to print using a gloss finish.
[Toner Save] ON/OFF Select this check box to adjust the printing density in
order to save the amount of toner consumed.
[Edge Enhance-
ment] ON/OFF Select this check box to enhance the edges of charac-
ters, graphics and images so that thin lines and small
letters become clearly visible.
[Font Settings...] − Select whether the fonts to be downloaded from the
computer to this machine are bitmap fonts or outline
fonts. Also specify whether to replace the TrueType
fonts by printer fonts when printing.
If garbled characters are detected while printing data
using the PCL driver, set download fonts to bitmap
fonts, and set printer fonts to OFF.
Function Name Option Description