Konica Minolta bizhub PRO C1060L - Manual (Page 13)

1-1
bizhub PRO C1060L
1
bizhub PRESS C1070/C1070P/C1060
1
Before Getting Started
1.1 Turning the Power ON/OFF
) Power supply
This machine has two power switches: main power switch and sub power switch.
NOTICE
NOTICE
The main power switch is normally kept turned on.
The main power switch must be turned on or off only when you start this machine for the first time or when you restart
this machine.
) Turning the power on
A
Open the front door of the main body, then turn the main power switch on.
When the main power switch is turned on, the Power LED on the control panel lights up in red.
B
Turn on the sub power switch on the upper-right corner of the main body.
When the sub power switch is turned on, the Power LED on the control panel lights up in green.
After the start screen has been displayed, the
default screen is displayed.
The default screen can be selected from
Utility/Counter. For details, refer to the HTML
User's Guide.
When [Ready to print] is displayed on the
[MACHINE] screen, you can use this machine.
ON OFF
OFF
ON