Konica Minolta bizhub PRO C1060L User Manual

Page 81

Advertising
background image

5-31

bizhub PRO C1060L

5

bizhub PRESS C1070/C1070P/C1060

K

Click [Start].

L

When a message appears, place the
FD-5BT on the white calibration plate,
then click [OK] while holding it down.

NOTICE

NOTICE

When the FD-5BT is placed on the plate, it does not
come into contact with the white calibration plate.
Securely press down. If these is a gap, the default
adjustment will fail.

M

When the message is displayed, click
[OK] to start the measurement.

N

Prepare the printed chart.

-

Place five to 10 blank sheets of the same
color under the printed chart so that it will
not be affected by the color of the working
table.

-

If a ruler is available, align it on the chart.

-

To make the measurement, remove the
FD-5BT from the target mask.

Advertising
This manual is related to the following products: