Konica Minolta bizhub PRO C1060L - Manual (Page 62)

5-12
5.1 Both Sides Adjustment
P
Press [X] or [Y] at each point, and enter the measured numeric value using the keypad,
[,], or [+] on the screen.
- If the printing position is misaligned to the minus (-) side, enter a positive value (+). If the printing
position is misaligned to the plus (+) side, enter a negative value (-).
- To reset a value, press [Clear].
- To switch the positive sign (+) and negative sign (-), press [+/-].
Q
When entry processing is completed,
press [Adjustment Start].
R
After the adjustment is completed, press
[OK].
To finely adjust the adjustment value,
continuously proceed to step 4 in "Zoom and
Image Shift Adjustment" (page 5-14).