Konica Minolta bizhub PRO C1060L - Manual (Page 110)

7-8
7.3 Convenient Use of Scan Function (Scan to SMB)
7.3 Convenient Use of Scan Function (Scan to SMB)
You can send the scanned original data as an E-mail attachment, send it to a shared computer (SMB server), the FTP
server, or the WebDAV server, or save it to the USB flash drive installed on this machine.
This section describes the function (Scan to SMB) to send data to the SMB server.
Scan to SMB is a function that converts the original data scanned on this machine to a computer-compatible file and
sends the converted data to a target computer or a shared folder on the server. You can store a handout original as
digital data using this function.
Also, you can send data to your computer and the file server used for daily file transfer in order to share it.
To carry out Scan to SMB using the Image Controller IC-602 and Mac OS X 10.7 or later, the appropriate setting is
required. For details, refer to the HTML User's Guide.
Step 1: Prepare the destination computer
In Step 1, execute the following tasks:
- To check the destination computer name and accessible user name.
- To create a folder in the destination computer and to configure a sharing setting.
) In a Windows environment
Tips
To carry out this task, the computer's administrator privilege is required.
A
Check [Computer name] in [System Properties].
- To display [System Properties], right-click [Computer], then click [Properties].
- The computer name is required to specify a destination. Write down the computer name so that you
do not forget it.
B
Check the user name.
- For Image Controller IC-602, only the user name is required.
- Select [All Programs] - [Accessories], click [Command Prompt], type in "set user", then press the
[Enter] key. The domain name and user name are displayed. The login user name is shown following
"USERNAME=".
- The user name is required to specify a destination. Write down the user name so that you do not
forget it.