Konica Minolta bizhub PRESS C1085 - Manual (Page 107)

bizhub PRESS C1100/C1085 (IC-602) 8-11
8.3 Convenient Use of Scan Function (Scan to SMB) 8
4
Set to a shared folder.
% Right-click the folder to be shared, open [Properties], then click [Advanced Sharing] in the [Sharing]
tab. On the opened window, select the [Share this folder] check box.
% In Windows XP, right-click the folder to be shared, open [Properties], then select [Share this folder]
in the [Sharing] tab.
5
Set [Permissions].
% Click [Permissions] on the [Advanced Sharing] window, select [Group or user names] - [Everyone],
then set [Change] of Permissions to Allow.
% In Windows XP, click [Permissions] in the [Sharing] tab, select [Group or user names] - [Everyone],
then set [Change] of Permissions to Allow.
6
Add a user to be permitted.
% Click [Add] on the [Permissions] screen, open [Select Users or Groups], and enter "computer name
(or domain name)\user name" into the [Enter the object names to select] field. Then, click [Check
Names]. If the user name is underlined, click [OK].
7
Select the user name added in step 6, and select the [Change] check box under Allow in Permissions,
then click [OK].
In a Macintosh environment.
Tips
- To carry out this task, the computer's administrator privilege is required.
1
Select [About This Mac] - [More Info…] to check [IP Addresses] and [User name].
2
Enable file sharing.
% In the Apple menu, click [System Preferences...] - [Sharing] to open the [Sharing] window, then se-
lect the [File Sharing] check box.
3
Enable the SMB-base sharing.
% Click [Options] on the [Sharing] window, select the [Share files and folders using SMB (Windows)]
check box, then select the check box of the login user name (displayed name).
4
Set to a shared folder.
% Click [+] on the [Sharing] window, select a folder to be shared, then click [Add]. Then, check that the
user name and access rights of the folder are set to the [Read&Write] mode.
Step 2: Connect this machine to the network
To connect this machine to the network, check that:
- The LAN cable is connected.
- The IP address is assigned to this machine.
Tips
- To configure the network settings, select [Administrator Setting] - [Network Setting] - [NIC Setting]. For
details, refer to the [HTML User's Guide].
Step 3: Prepare the operating environment for SMB transmission
Enable the SMB transmission function.
- Set [SMB Send Setting] of this machine to [Enable] (in general use, you do not need to change the de-
fault setting).
- When using the Image Controller IC-602 and Mac OS X 10.7 or later, the following setting is required.
– NTLM Setting
The NTLM setting is only available for v2.
– Date and time setting of this machine and computer
Specify the date and time, including the time zone.
Tips
- For details, refer to the [HTML User's Guide].