Konica Minolta bizhub PRESS C1085 - Manual (Page 69)

bizhub PRESS C1100/C1085 (IC-602) 6-21
6.2 Image Quality Adjustment 6
6.2.4 Executing calibration using the image controller
This adjustment method does not use [Color Density Control]. In general use, we recommend that you use
[Color Density Control].
This guide describes how to carry out calibration for daily maintenance using Color Centro and a colorimeter
(FD-5BT).
In addition, "Exact Color" or "G7 Calibration", which enables higher accuracy adjustment are available. For
details, refer to the [HTML User's Guide].
1
Start Color Centro.
% For information about how to start Color Centro, refer to page 4-9.
2
Click [Calibration].
3
Check that [Start Calibration] is enabled.
% If it appears dimmed, the color density
control is set to Enable. Change [Use
Color Density Control] to [OFF]. For infor-
mation about the setting procedure, refer
to page 6-16.
4
Select [Instrument] on the [Settings] menu,
then select [FD-5BT(M0)].