Konica Minolta bizhub C754 - Manual (Page 16)

Using License Install Utility 3
License Install Utility 3-8
2
Click the [Add] button.
The Device addition dialog box appears.
3
In the "Device address" box, type the address of the device to be
registered.
– An IPv4- or IPv6-compatible IP address, an SMB host name or a
DNS host name can be entered.
4
Type in any other necessary information.
– SNMPv1 Read Community Name: Specify the name of the
SNMPv1 read community.
– SNMPv3 Discovery User Name: Specify the SNMPv3 discovery
user name.
– Context name: Specify the SNMPv3 context name.
– SNMP Port number: Specify the number of the port used with
SNMP.
5
Click the [OK] button.
– The device cannot be registered if a connection with the device
cannot be established.
If a connection with the device is successfully established, the device
is registered.