Konica Minolta bizhub C754 - Manual (Page 23)

Using License Install Utility 3
License Install Utility 3-15
3
Select the search method.
– IPv4 broadcast: Select this method to send a broadcast in order to
search for devices.
– IPv4 unicast: Select this method to send an SNMP request to all
addresses within the search range in order to search for devices.
– IPv6 multicast: Select this method to send an SNMP request to all
addresses belonging to the multicast group in order to search for
devices.
4
Click the [OK] button.
The settings dialog box for the selected search method appears.
3.5.1 Description of the Device search settings dialog box (IPv4
broadcast)
Specify the settings used to search for devices by sending a broadcast.
2
Note
Be sure to enter settings for the items marked in the dialog box with an
asterisk (*).