Konica Minolta bizhub C754 - Manual (Page 28)

Using License Install Utility 3
License Install Utility 3-20
3
Check the entered information, and then click the [OK] button.
A connection to the license management server is established, and the
entered information is sent.
If the license information is successfully received by the license
management server, the certificate is registered.
3.6.2 Deleting certificate information
The information for active token certificates registered with License Install
Utility can be deleted.
2
Reminder
Even if the active token certificate information is deleted, the information
registered with the license management server is not deleted.
Deleting certificate information
1
From the "Active token certificate list", select the certificate whose
information is to be deleted.
2
On the "Tool" menu, click "Delete active token certificate".
– The dialog box can also be displayed by clicking the [Delete active
token certificate] button in the main window.
A confirmation message appears.
3
Click the [Yes] button.
– If there are issued licenses that are not registered with a device
(Not-activate licenses), clicking the [Yes] button also deletes the
information for those Not-activate licenses.
The information for the selected certificate is deleted from License
Install Utility.
If issued licenses remain on the certificate
When deleting certificate information, issued licenses that are not registered
with a device (Not-activate licenses) are also deleted.
Even if certificate information is deleted from License Install Utility, the
license information remains on the license management server.
Even after the certificate information is deleted, a Not-activate license can be
registered with a device using the following methods.