Konica Minolta bizhub C200 - Manual (Page 35)

bizhub C200 (Phase2) 1-31
Introduction 1
3
From the touch panel, select the paper type.
– Press and until the desired paper type appears.
– If label sheets are loaded, select "Thick 1".
– If non-standard-size paper is loaded, specify the Paper Size setting.
– Printing on OHP transparencies is possible only in black.
!
Detail
Paper of the following types and amounts can be loaded into the tray 1.
Plain paper (60 g/m
2
to 90 g/m
2
): Up to 250 sheets
Thick paper 1 (91 g/m
2
to 150 g/m
2
): Up to 20 sheets
Thick paper 2 (151 g/m 2 to 209 g/m 2 ): Up to 20 sheets
Thick paper 3 (210 g/m
2
to 256 g/m
2
): Up to 20 sheets
OHP transparencies: Up to 20 sheets
Envelopes: Up to 20
Label sheets: Up to 20 sheets
Paper of the following sizes can be specified for the tray 1.
Standard-sized paper: A3 w to B6 w, A6 w, 12 -1/4 e 18 w
*1
, 12 e 18 w
*1
to 5-1/2 e 8-1/2 w/ v,
4 e 6 w, 8 e 13 w*
2
, 16K w/ v, 8K w
Non-standard-sized paper: Width: 90.0 mm to 311.1 mm; Length: 139.7 mm to 457.2 mm
*1
This is one size larger than A3. 12-1/4 e 18 is equivalent to 311.1 mm e 457.2 mm, and 12 e 18 is
equivalent to 304.8 mm e 457.2 mm
*
2
There are five Foolscap sizes: 220 e 330 mm w, 8-1/2 e 13 w, 8-1/4 e 13 w, 8-1/8 e 13-1/4 w and
8 e 13 w. Any one of these sizes can be selected. For details, contact your service representative.