Konica Minolta bizhub C200 - Manual (Page 55)

bizhub C200 (Phase2) 1-51
Introduction 1
*1 Parts marked in this way are not shown in the illustration.
*2
Parts marked in this way are internal options and therefore are not shown in the illustration.
9 Paper feed cabinet PC-204 Both the top and bottom drawers can each be loaded with up to 500 sheets of
paper.
Referred to as the "double paper feed cabinet" throughout the manual.
10 Paper feed cabinet PC-405 Can be loaded with up to 2,500 sheets of paper.
Referred to as the "LCT" throughout the manual.
11 Desk DK-504 Allows this machine to be set up on the floor.
Referred to as the desk throughout the manual.
12 Job separator JS-505 When installed onto the output tray, it can be used for separating printed pag-
es.
Referred to as the "separator" throughout the manual.
13 Assist handle AH-101 *1 Used to close the original cover or the ADF.
14 Fax kit FK-507 *2 Allows this machine to be used for faxing.
15 Fax multi line ML-504 *2 Allows expansion of the telephone lines for faxing.
16 Stamp unit SP-503 *2 Applies a stamp to documents that have been scanned.
17 Spare TX marker stamp
MS-501
*2
Used to replace the stamp in the stamp unit.
18 Expanded memory unit
EM-310
*2
Allows the memory to be expanded by 512 MB.
This is necessary for using the printer functions for double-sided printing, se-
cure printing, sorting printed pages and direct printing from a PDF file, for
scanning documents with the TWAIN driver without compressing the data, and
for shifting printed pages when the separator is installed.
No. Part name Description