Konica Minolta bizhub C200 - Manual (Page 8)

1 Introduction
1-4 bizhub C200 (Phase2)
1.2 Safety information
This section contains detailed instructions on the operation and maintenance of this machine. To achieve
optimum utility of this device, all operators should carefully read and follow the instructions in this manual.
Please read the following section before connecting the machine to the supply. It contains important
information related to user safety and preventing equipment problems.
Please keep this manual in a handy place near the machine.
Make sure you observe all of the precautions appear in each section of this manual.
2
Note
Some parts of the contents of this section may not correspond with the purchased product.
Warning and precaution symbols
The following indicators are used on the warning labels or in this manual to categorize the level of safety
warnings.
7 WARNING
Ignoring these warnings could cause serious injury or even death.
%
Do not ignore these safety advices.
7 CAUTION
Ignoring this cautions could cause injury or damage to property.
%
Do not ignore these safety advices.
Meaning of symbols
Disassemble and modification
7 WARNING
Ignoring these warnings could cause serious injury or even death.
%
Do not ignore these safety advices.
Symbol Meaning Example Meaning
A triangle indicates a danger against
which you should take precaution. This symbol warns against possible
causes of burns.
A diagonal line indicates a prohibited
course of action. This symbol warns against dismantling
the device.
A solid circle indicates an imperative
course of action. This symbol indicates you must unplug
the device.
Warning Symbol
• Do not attempt to remove the covers and panels which have been fixed to the product.
Some products have a high-voltage part or a laser beam source inside that could
cause an electrical shock or blindness.
• Do not modify this product, as a fire, electrical shock, or breakdown could result. If the
product employs a laser, the laser beam source could cause blindness.