Konica Minolta bizhub C200 - Manual (Page 42)

1 Introduction
1-38 bizhub C200 (Phase2)
1.15 Clearing paper misfeeds
If a paper misfeed occurs, a screen like the one shown below appears with the location of the misfeed
indicated. To clear the misfeed, check the location indicated in the screen, and then perform the necessary
operation.
A flashing "o" indicates the location of the paper misfeed.
A lit "o" indicates areas where paper may have been misfed and that should be checked.
Paper misfeed locations
For details on misfeeds 1 through 11, refer to page 1-39 of this manual and perform the appropriate
operation.
For details on misfeeds 12 and 13 (separator), refer to page 1-41 of this manual and perform the appropriate
operation.