Konica Minolta bizhub C200 - Manual (Page 54)

1 Introduction
1-50 bizhub C200 (Phase2)
1.17 Options
This section describes the configuration of the options installed on this machine.
By adding options, various office needs can be satisfied.
2 3
4
5
6
7
8 9 10 11
12
1
No. Part name Description
1 Main unit The document is scanned by the scanner section, and the scanned image is
printed by the printer section.Referred to as the "machine", the "main unit", or
the "C200" throughout the manual.
2 Reverse automatic docu-
ment feeder DF-612 Automatically feeds one document sheet at a time for scanning, and automat-
ically turns over double-sided documents for scanning.Referred to as the
"ADF" throughout the manual.
3 Original cover OC-508 Presses down on the loaded document to keep it in place.Referred to as the
"original cover" throughout the manual.
4 Working table WT-503 Provides an area to temporarily place a document or other materials.
5 Automatic duplex unit
AD-505 Turns over printed pages, allowing double-sided pages to be printed automat-
ically.
Referred to as the "duplex unit" throughout the manual.
6 Multi bypass tray MB-502 Can be loaded with up to 100 sheets of paper.
Referred to as the "bypass tray" throughout the manual.
7 Paper feed cabinet PC-105 Can be loaded with up to 500 sheets of paper.
Referred to as the "additional paper feed cabinet" throughout the manual.
8 Paper feed cabinet PC-104 The top drawer can be loaded with up to 500 sheets of paper, and the bottom
drawer can be used as storage.
Referred to as the "single paper feed cabinet" throughout the manual.