5 administrator settings (ip/i-fax), 3 system settings - restrict user access, Restrict operation - restrict broadcasting – Konica Minolta BIZHUB 223 User Manual
Page 247: 6 fax settings - header information, Administrator settings (ip/i-fax) -35, System settings - advanced preview setting, Original direction setting display -35, Fax settings - header information -35
bizhub 423/363/283/223
10-35
10.5
Administrator Settings (IP/I-FAX)
10
10.5
Administrator Settings (IP/I-FAX)
This section describes administrator settings that are configured for Internet Fax and IP Address Fax.
Reference
-
The IP address fax and Internet fax functions are available only when a Hard Disk is installed.
10.5.1
System Settings - Power Save Setting - Enter Power Save Mode
d
Reference
For the setting procedure, refer to page 10-14.
10.5.2
System Settings - Output Setting - Print/Fax Output Setting - Fax
d
Reference
For the setting procedure, refer to page 10-14.
10.5.3
System Settings - Restrict User Access
Restrict Access to Job Settings - Registering and Changing Addresses
d
Reference
For the setting procedure, refer to page 10-9.
Restrict Access to Job Settings - Change the "From" Address
The From address is used for the address configured for the device.
d
Reference
For the setting procedure, refer to page 10-9.
Restrict Operation - Restrict Broadcasting
d
Reference
For the setting procedure, refer to page 10-10.
10.5.4
System Settings - Stamp Settings - Fax TX Settings
d
Reference
For the setting procedure, refer to page 10-15.
10.5.5
System Settings - Advanced Preview Setting
− Original direction setting dis-
play
d
Reference
For the setting procedure, refer to page 10-12.
10.5.6
Fax Settings - Header Information
Reference
-
For Internet Fax or IP Address Fax, sender information is not available for [Outside Body Text]. Even if
[Outside Body Text] is selected, sender information is added to the inside of the original.