Konica Minolta PAGEPRO 9100 User Manual
Page 137
Deinstalling Accessories
131
How do I remove a 4-bin mailbox?
1
Turn off the printer.
2
Unplug the power supply cord and interface cable.
3
Remove the four mailbins (trays) from the 4-bin mailbox.
4
Disconnect the 4-bin mailbox cable
from the connector on the printer.
a
Press .
b
Unplug the connector .
3
Press in the two buttons (one on
each side) at the back of the 4-bin
mailbox, and then lift the sorter up off
the transport unit .
4
Remove the two screws securing the
transport unit, and then remove the
transport unit from the printer.
5
Return the stopper to its original
position.
6
Install the two brackets, the back
section of the top cover, and the
connector cover, removed during
installation of the 4-bin mailbox.
7
If you are going to use the printer without the 4-bin mailbox, reconnect the
printer’s power supply cord and interface cable.
How do I remove an optional media tray?
1
Turn off the printer, and unplug the
power supply cord and interface
cable.
2
Remove the upper media tray.
1
2
1
2
1