Konica Minolta PAGEPRO 9100 - Manual (Page 138)

Deinstalling Accessories 132
3
Detach the mounting brackets from
the two locations on the back of the
printer.
4
Loosen and remove the screws in
front. (Use a coin to loosen the
screws.)
When deinstalling multiple optional
media trays, remove each using the
same procedure.
5
After loosening the screws, lift the
printer away from the optional media
tray(s).
WARNING!
Your printer weighs approximately 61.7 lbs (28 kg) without
consumables. Be sure to have help when lifting and moving it.
6
Replace any tape and packing
material.
7
If you are going to use the printer without the optional media tray(s),
reconnect the printer’s interface cables.