6 install the new paper separation roller, 7 tighten the two screws, 8 reinsert the media tray into the printer – Konica Minolta PAGEPRO 9100 User Manual
Page 29
Advertising
Replacing Rollers
23
3
Loosen the two screws on the rear of the media tray.
4
Remove and dispose of the old paper separation roller.
Dispose of it according to local regulations.
5
Remove the new paper separation roller assembly from its packaging.
6
Install the new paper separation roller.
7
Tighten the two screws.
8
Reinsert the media tray into the
printer.
9
If you have optional media tray(s)
installed, repeat steps 3–8 for
each one.
Advertising