Konica Minolta PAGEPRO 9100 - Manual (Page 116)

Dual In-Line Memory Modules (DIMMs) 110
14
Insert the 4-bin mailbox cable into the
connector on the left side of the
printer until it locks into place.
15
Install the four mailbins (trays) onto
the 4-bin mailbox by inserting the
tabs on the left and right sides of the
tray into the slots in the 4-bin mailbox.
Install the trays starting from the
bottom.
16
Reconnect all interface cables.
17
Reconnect the power cord and turn
on the printer.
In compliance with UL guide-
lines, “The appliance inlet is
considered to be the main dis-
connect device.”
Before moving the printer,
even just a small distance, be sure to disconnect and remove the
4-bin mailbox from the printer.
Dual In-Line Memory Modules (DIMMs)
Dual in-line memory modules (or DIMMs) are compact circuit boards with
surface-mount memory chips.
Your PagePro 9100 comes with 64 MB SDRAM printer memory. However,
you can upgrade the PagePro 9100 to a maximum of 512 MB of RAM
through the installation of additional DIMMs. Two DIMM slots are
available. Additional memory must be 32, 64, 128, or 256 MB, PC-100 Com-
pliant SDRAM DIMMs.
Additional memory allows you to download more fonts and increase the
printer's buffer (area where data sent from the computer is stored while