Time-of-day clock, Installing a time-of-day clock, Time-of-day clock 124 – Konica Minolta PAGEPRO 9100 User Manual
Page 130: Installing a time-of-day clock 124, Warning
Time-of-Day Clock
124
Time-of-Day Clock
The time-of-day clock provides time and date information on the startup page
and in the accounting data.
Installing a Time-of-Day Clock
Attention
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 106. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer, and then
disconnect the power cord and
all interface cables from the
printer.
2
Loosen the four screws and
pull the controller board from
the printer.
WARNING!
Because the time-of-day clock includes an internal battery, there is a
danger of explosion if the clock is incorrectly installed or replaced.
Replace it only with a supported KONICA MINOLTA time-of-day clock.
Dispose of any used time-of-day clock in accordance with local laws
and regulations.