Konica Minolta PAGEPRO 9100 - Manual (Page 41)

Media Storage and Handling 35
Approved for laser printing
Dry
Printed on the front address side only
What should I watch out for when loading labels?
A label consists of a face sheet (the printing surface), adhesive, and a carrier
sheet:
The face sheet must follow the plain paper specification.
The face sheet surface must cover the entire carrier sheet, and no
adhesive should come through on the surface.
You can print continuously with label paper. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous print and print one sheet at a time.
Format label data within your application. Try printing your data on a plain
sheet of paper first to check placement. Check your application documenta-
tion for other information on printing labels.
Do not use label sheets that
Have labels that easily peel off
Have the backing sheets that have peeled away or have exposed
adhesive
Labels may stick to the fuser, causing them to peel off and media jams to
occur.
Are precut
Use label sheets that are
Recommended for laser printers
What should I watch out for when loading postcards?
Do not use postcards that are
Coated
Warped or bent
Shiny backed paper Paper cut into labels Full page labels
(uncut)
Do not use OK to use