Konica Minolta PAGEPRO 9100 - Manual (Page 43)

Media Storage and Handling 37
What type and amount of media can I load?
Use only media approved for laser products. For a list of currently
approved media, go to printer.konicaminolta.com. To order approved
transparencies, go to printer.konicaminolta.com.
Often, an arrow on the media package label indicates the printing-side of the
media. If you can’t remember which side of the media to print on, remove the
media from the tray, rotate the stack 180°, turn the stack over, and then place
it back in the tray.
Attention
Do not allow media to go above the fill limit mark inside the tray or the
media may not be fed correctly.
What sizes/weights of media can I use?
Media Source/Maximum Amount
Based on 16–20 lb bond
(75 g/m²)*
Media Type
Input Capacity**
Upper
Media
Tray*** Multi-
purpose
(MPT) Tray
Optional
Media
Trays***
(Optional1,
2, or 3)
Plain
Paper 16–24 lbs (60–90 g/m 2 ) 500 FU
(A5 media:
350 FU)
200 FU 500 FU
Special
Media Custom Media Not
supported
50 FU Not
supported
Envelopes 100 FU
Label Stock (letter or A4 only) 50 FU
Postcards (Japanese Size) 100 FU
Thick Stock 24–90 lbs
(91–163 g/m 2 )
50 FU
Transparencies (letter or A4
only) 100 FU
Notes * Capacity for other weights and thicknesses varies accordingly
** All media is inserted face up into the trays.
*** You can rename these trays for your convenience. See the Crown Books
(in PDF on the Documentation CD-ROM) for more information.
Media Media Size Weights Feed
Direc-
tion
Input
Source
*
Output
Source
Auto-
duplex
Inches Millimeters
8 Kai 10.2x14.6 260.0x370.0 16–24** SEF M Top No
16 Kai 7.3x10.2 185.0x260.0 LEF M Top No
32 Kai 5.1x7.3 130.0x185.0 LEF M Top No
A3 11.7x16.5 297.0x420.0 SEF UO/M Top/Mbox Yes