Loading media, How do i prepare the media, How do i refill a media tray – Konica Minolta PAGEPRO 9100 User Manual
Page 48: 1 pull out the media tray until it stops, Loading media 42
Loading Media
42
Loading Media
How do I prepare the media?
Don’t unwrap paper above the printer, as this might cause paper
particles to fall into the printer.
1
Take off the top and bottom sheets of a ream of paper.
2
Fan a stack of approximately 500
sheets of paper to prevent static
buildup.
Don’t fan large quantities of
transparency media.
A fill limit mark is provided on the inside right side of the tray. The upper
and optional media tray(s) hold approximately 500 sheets of 20 lb bond
(75 g/m²) paper.
How do I refill a media tray?
1
Pull out the media tray until
it stops.
The illustration only shows
the upper media tray. The
following instructions are
also valid for the
optional media trays.
For a list of currently approved
media, go to printer.konicami-
nolta.com. To order approved trans-
parencies, go to
printer.konicaminolta.com.