Konica Minolta magicolor 5570 User Manual
Page 248
Advertising
Hard Disk Kit
234
6
Insert the three mounting pins
on the hard disk drive into the
holes in the controller board to
mount the hard disk drive onto
the controller board.
7
Reinstall the panel and tighten the seven screws.
8
Attach the rear cover.
9
Reconnect all interface cables.
10
Reconnect the power cord, and
turn on the printer.
11
Declare the Hard Disk in the Windows printer driver (Properties/Configure
tab).
Advertising
This manual is related to the following products: