Konica Minolta magicolor 5570 - Manual (Page 28)

Selecting Driver Options/Defaults (for Windows) 14
"
With Windows NT 4.0, right-click the KONICA MINOLTA
mc5570(5550) PCL6 printer icon or the KONICA MINOLTA
mc5570(5550) PS printer icon in the Printers directory, and then
click Document Defaults. Skip to step 10.
8
Select the General tab.
9
Click Printing Preferences.
Printing Preference dialog box appears.
10
Select the default settings for your printer, such as the default media for-
mat you use, on the appropriate tabs.
11
Click Apply.
12
Click OK to exit from the Print preference dialog box.
13
Click OK to exit from the Properties dialog box.
Windows Me/98SE (KONICA MINOLTA mc5570 PCL6)
(KONICA MINOLTA mc5550 PCL6)
1
Choose the driver’s properties as follows:
– From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA mc5570
PCL6 printer icon or the KONICA MINOLTA mc5550 PCL6 printer icon
and choose Properties.
2
Select the Configure tab.
3
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 7.
4
Click the Refresh to automatically configure installable options.
"
The Refresh is available only if bi-directional communication is
available with the printer, otherwise it is grayed out.
5
From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
"
If Printer Memory is selected, select 256 MB, 512 MB, 768 MB or
1024 MB, according to the installed memory. The factory default
setting is 256 MB.
"
If Memory Card is selected, select Disable, Enable (1 GB
Under), or Enable (1 GB Over), according to the installed Com-
pactFlash card.
6
Click Apply.
7
Select the default settings for your printer, such as the default media for-
mat you use, on the appropriate tabs.