Konica Minolta Bizhub 215 - Manual (Page 114)

bizhub 215 5-15
5.6 Scanning using a WIA driver 5
Usi
ng
as
a S
c
a
nne
r
Cha
p
ter 5
5.6 Scanning using a WIA driver
Scanning is enabled using an application that supports WIA.
The operation method differs depending on the application to be used.
1
Load the original.
% For details on how to load the original, refer to page 1-37.
2
Start the image processing application on the computer side.
3
Configure the scanning settings.
% In [Paper source], select the scanning method for the original.
% Select the type of the image to be scanned.
% Using [Select an option below for the type of picture you want to scan.], you can specify the image
quality.
% Click [Preview] to display the scanning result.
4
Click [Scan].
Scanning starts.