Konica Minolta Bizhub 215 - Manual (Page 55)

Copying an original 2
2-2 bizhub 215
2.1
Us
ing
as
a C
opy
Ma
ch
ine
Ch
apte
r 2
2 Using as a Copy Machine
2.1 Copying an original
This section describes basic procedures for loading and copying an original.
1
Press Copy and load the original.
% For details on how to load the original, refer to page 1-37.
2
Specify the image quality.
% Use +, to select the correct setting, then press OK.
% For originals containing both text and a photo, select [TEXT/PHOTO].
% For originals containing only text, select [TEXT].
% For originals containing only photos, select [PHOTO].
3
Specify the density.
% Use +, to select the correct setting, then press OK.
% When you select [MANUAL], use *) to select the appropriate density, then press OK.
% In manual setting, you can select the density from nine different levels.
% You cannot specify the automatic density control and the [PHOTO] image quality setting at the same
time.
4
Use the Keypad to specify the number of copies, then press Start.
% When you load the original onto the Original Glass, repeat Steps 1 to 4.
% To interrupt the copy operation being performed, press Clear/Stop. For details, refer to page 2-8.