Konica Minolta Bizhub 215 - Manual (Page 40)

bizhub 215 1-35
1.14 Operations on the Control Panel 1
Int
ro
duc
ti
on
Chap
ter
1
1.14 Operations on the Control Panel
When changing a setting, use +, ,, *, or ) on this machine to move the cursor. To determine the setting
you have selected, press OK.
Specifying the zoom ratio
The following describes operations on the Control Panel, using the procedure for specifying the zoom ratio
as an example.
1
Press the Zoom button.
2
Press , once, then press OK.
3
Press , twice, then press OK.
The zoom ratio has been specified.
Tips
- In this document, the procedure described above is written as "Use +, to select, then press OK". To
correct the action you have carried out, press Back to return to the previous screen.