Konica Minolta Bizhub 215 - Manual (Page 44)

bizhub 215 1-39
1.17 Loading paper 1
Int
ro
duc
ti
on
Chap
ter
1
1.17 Loading paper
Loading paper into Tray 1
1
Pull out Tray 1.
% Press the lifter plate down until it "clicks" into position.
1 Paper take-up roller
2 Lifter plate
NOTICE
Be careful not to touch the surface of the paper take-up roller with your hand.
2
Load the paper and adjust the lateral guide.
% Slide the lateral guide to the size of the paper.
% Load the paper so that the side on which you want to print is facing up.
% Be sure to load the paper below the tab, so that the stack height does not exceed the , mark.
% Up to 250 sheets of plain paper can be loaded.
% Up to 20 sheets of thick paper can be loaded.
% Up to 10 OHP transparencies can be loaded.
% Up to 10 envelopes can be loaded.
d
Reference
For details on how to load paper into Tray 1, refer to Chapter 3 of the [User's Guide Copy Operations].
2
1